Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME Sec IX SWPS

Status
Not open for further replies.
vxray

vxray

Petroleum
Joined
Feb 10, 2003
Messages
1
Location
US
We welded coupon 6" API 5L .719 wall per SWPS ASME sec IX , and documented data and wanted to use as prequalified SWPS B2.1-1-202-96, 6010 down and 7018 up 1/8 thru .750 and qualified by radiography. Is this allowed or do we have to purchase copy of SWPS and use it as our guide.

Thanks
Greg
 
Status
Not open for further replies.

Similar threads

engr2GW
  • Locked
  • Question Question
ASME B16.5 flange pressure and temperature rating
Replies
2
Views
1K
4T4
4T4
Bartonrj25
  • Locked
  • Question Question
Making section views from a detail view
Replies
2
Views
848
SnTMan
SnTMan
MCRodg
  • Locked
  • Question Question
Logic behind ASME 14.5 1.6.2(a). No Zero before decimal point.
Replies
6
Views
2K
looslib
looslib
braham0793
  • Locked
  • Question Question
ANSI 818.2.2 / ASME B18.2.2
Replies
2
Views
383
101Mpa
101Mpa
IEngineer08
  • Locked
  • Question Question
1965, 1966, 1967 ASME Section VIII Div I
Replies
1
Views
476
jte
jte

Part and Inventory Search

Sponsor

Back
Top