Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME B16.5 RTJ Flanges

Status
Not open for further replies.
mechcat

mechcat

Mechanical
Oct 10, 2001
23
How are the approximate distances between RTJ flanges determined in ASME B16.5?
 
Status
Not open for further replies.

Similar threads

Shahpar
  • Question
Ring Joint Flanges for 38 inch and larger size as per ASME B16.47 Series A
Replies
1
Views
3K
GD2
GD2
X
  • Question
B16.5 Max Flange Hydrostatic Test Pressure
Replies
8
Views
6K
TGS4
TGS4
swearingen
  • Question
Can Standard Flanges Resist Full Bending Strength of Pipe?
Replies
7
Views
3K
swearingen
swearingen
stoerw
  • Locked
  • Question
RTJ Flange Failure at Low Loads 2
Replies
8
Views
571
LittleInch
LittleInch
anders_1
  • Locked
  • Question
Bolt lengths in ASME B16.5 (2020) 1
Replies
3
Views
382
anders_1
anders_1

Part and Inventory Search

Sponsor

Back
Top Bottom