Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASCE 7-22 component and cladding - no tables?

Status
Not open for further replies.
lexpatrie

lexpatrie

Structural
Joined
Aug 20, 2009
Messages
1,165
Location
US
Am I missing something, the latest iteration of ASCE 7 doesn't have the old component and cladding tables?
 
Sort by date Sort by votes
lexpatrie: Which tables are you referring to (that were present in earlier edition and not in 7-22) and which edition was that?

-Just a curious engineer
 
Upvote 0 Downvote
I'm looking at ASCE 7-10 with the tabulated values for components and cladding in Table 30.7-2.

After five O'clock -
ASCE 7-16 Table 30.6-2.
 
Upvote 0 Downvote
Yeah you mean the prescriptive tables? Those have been done away with.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DG57
  • Question Question
ASCE 7-22 Software
Replies
3
Views
2K
RWW0002
RWW0002
SteelPE
  • Locked
  • Question Question
ASCE 7-22 Windward Drift
Replies
6
Views
5K
DanKile
DanKile
Pratikmokal
  • Question Question
Snow drifts against low roof parapet per ASCE 7-22
Replies
5
Views
5K
ANE91
ANE91
SteelPE
  • Question Question
ASCE 7-16 Wind Loads
Replies
2
Views
3K
DanKile
DanKile
Larryhd2
  • Locked
  • Question Question
ASCE 7-16 vs 7-22... use higher Sds?
Replies
7
Views
3K
Aesur
Aesur

Part and Inventory Search

Sponsor

Back
Top