Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AS3700 RF1 & RF2 factors

Status
Not open for further replies.
GClair

GClair

Structural
Feb 6, 2014
3
Hi guys,
Would really appreciate some help with this one.
AS3700 clause 7.4.4.2 calls up RF1 as "restraint factor for the first supported edge" and similarly RF2 as "restraint factor for second supported edge".
Does anyone know which are edges are the "first" and "second" edges?
This makes a big difference in table 7.5 for cases 5 & 6 (with openings)
Thanks in advance.
 
Status
Not open for further replies.

Similar threads

BPadam
  • Locked
  • Question
A smooth joint between a floor & the waist slab of the in-place concrete stair in Revit?
Replies
0
Views
588
BPadam
BPadam
Adrielle
  • Locked
  • Question
Define NLLink Properties - Distinction of "Plastic1" & "Dampe
Replies
0
Views
114
Adrielle
Adrielle

Part and Inventory Search

Sponsor

Back
Top Bottom