Oct 3, 2013 #1 zappedagain Electrical Joined Jul 19, 2005 Messages 1,074 Location US I'm looking for the requirements for Class 1 Division 2 environments. Are these two different names for the same document? Thanks, Z
I'm looking for the requirements for Class 1 Division 2 environments. Are these two different names for the same document? Thanks, Z
Oct 3, 2013 #2 cdafd Specifier/Regulator Joined Aug 18, 2005 Messages 2,953 Location US http://www.nfpa.org/codes-and-standards/document-information-pages?mode=code&code=70 Upvote 0 Downvote
Oct 4, 2013 #3 stookeyfpe Specifier/Regulator Joined Mar 13, 2005 Messages 1,882 Location US I have no idea of what NEC 500 is but I am very intimate with NFPA 700, Article 500. For hazardous (classified) location electrical equipment, NEC Article 500 is the criteria most likely adopted if the project is in a US or Canadian jurisdiction. Upvote 0 Downvote
I have no idea of what NEC 500 is but I am very intimate with NFPA 700, Article 500. For hazardous (classified) location electrical equipment, NEC Article 500 is the criteria most likely adopted if the project is in a US or Canadian jurisdiction.
Oct 4, 2013 #4 DRWeig Electrical Joined Apr 8, 2002 Messages 3,004 Location US NEC = NFPA 70 NEC 500 = NFPA 70 Article 500 Best to you, Goober Dave Haven't see the forum policies? Do so now: Forum Policies Upvote 0 Downvote
NEC = NFPA 70 NEC 500 = NFPA 70 Article 500 Best to you, Goober Dave Haven't see the forum policies? Do so now: Forum Policies
Oct 4, 2013 Thread starter #5 zappedagain Electrical Joined Jul 19, 2005 Messages 1,074 Location US Thanks all! Upvote 0 Downvote