Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Arc Flash Analysis SKM

Status
Not open for further replies.
K

Kanu_01

Electrical
Joined
Nov 27, 2024
Messages
18
I am trying to run arc flash analysis in SKM. My system is at 13.2 kV. Do I need to define voltage tolerances in EPRI method too if I am running my system at 13.2kV? What tolerance range is considered to calculate incident energy?IMG_0961.jpeg
 

Attachments

  • IMG_0962.jpeg
    IMG_0962.jpeg
    5.1 MB · Views: 1
Status
Not open for further replies.

Similar threads

charz
  • Question Question
Arc Resistant Switchgear
Replies
1
Views
8K
dpc
dpc
Dvhez
  • Locked
  • Question Question
Why isn't the immediate upstream breaker tripping in my 400V Arc Flash simulation?
Replies
2
Views
884
dpc
dpc
NickParker
  • Locked
  • Question Question
Arc detection relay Vs UFES (Ultra fast earthing switch)
Replies
8
Views
5K
bacon4life
bacon4life
gvaelectric
  • Locked
  • Question Question
PD TEST ANALYSIS
Replies
2
Views
2K
gvaelectric
gvaelectric
E
  • Locked
  • Question Question
Fault Current Analysis
Replies
7
Views
5K
waross
waross

Part and Inventory Search

Sponsor

Back
Top