Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

applying roof vents

Status
Not open for further replies.
inspectorjeff

inspectorjeff

Structural
Jul 14, 2002
13
I am in a 110 mph wind zone.48" x24" roof vents are cut into the 1/2 osb roof sheathing.Should the edges be blocked at unsupported edges? Inspector Jeff in Florida
 
Status
Not open for further replies.

Similar threads

palk7 EIT
  • Question
OWSJ Roof deflection 2
Replies
7
Views
3K
jerseyshore
jerseyshore
Henry94606
  • Question
Roof hip 1
Replies
8
Views
4K
Henry94606
Henry94606
MyCupboard
  • Question
Residential tied roof
2
Replies
29
Views
5K
jerseyshore
jerseyshore
TRAK.Structural
  • Question
Roof Diaphragm Openings
Replies
3
Views
2K
TRAK.Structural
TRAK.Structural
danvines
  • Question
Cable-suspended roof
Replies
5
Views
2K
danvines
danvines

Part and Inventory Search

Sponsor

Back
Top Bottom