Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Apply Material to Part Body to see material on body.

Status
Not open for further replies.

mrcadman2u

Aerospace
Joined
Dec 4, 2002
Messages
26
Location
US
Hello to all,
My next question is a CATIA question. I know how to appy material to the part body but what I would like to do is to have the material to be visible on the part body. Hope this makes sense.

CATIA V5 Rev 19

thanks,

Jerry
 
You will probably more expertise in the CATIA Group, for a question like this, than this group.

Recommend You re-post this to>>>
Regards, Wil Taylor

Trust - But Verify!

We believe to be true what we prefer to be true.

For those who believe, no proof is required; for those who cannot believe, no proof is possible.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top