Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Application method for 3M transfer tape

Status
Not open for further replies.
mufab

mufab

Mechanical
Joined
Apr 4, 2006
Messages
1
Location
US
I have been trying to use a 3M transfer tape to manually bond two pieces of Plexiglas chips (3"x2"x0.125") using a 3M transfer tape. However, I continuously get air bubbles between the tape and the slides.

Are there any equipments that can be used to obtain perfect bonds using tranfer tapes with no trapped air bubbles?

Any suggestions would be greatly appreciated.

- mufab
 
Sort by date Sort by votes
Yes, the 3M Scotch ATG 700 dispense gun is designed to dispense adhesive transfer tape
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K.P.M.
  • Locked
  • Question Question
Adhesive for Cryogenic application
Replies
1
Views
1K
MintJulep
M
Stefan2211
  • Locked
  • Question Question
High temperature sealant for SS hoses 1200 °F with NPT thread
Replies
1
Views
1K
btrueblood
btrueblood
J.Platt
  • Locked
  • Question Question
Adhesive for grit on a stainless roller
Replies
2
Views
1K
Compositepro
Compositepro
R
  • Question Question
Seeking Guidance on Developing an Adhesive Coating Formula
Replies
5
Views
4K
btrueblood
btrueblood
B.L.Smith
  • Locked
  • Question Question
3M 4323 Adhesive
Replies
2
Views
309
B.L.Smith
B.L.Smith

Part and Inventory Search

Sponsor

Back
Top