Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 661

Status
Not open for further replies.
CadLady

CadLady

Mechanical
Joined
Jul 21, 1999
Messages
19
Location
US
Could someone explain to me what is meant by Section 6.1.7.5:

"Positive means (such as a self-centering taper or the equivalent) shall be provided to ensure seating of the gasket in the spot-face recess."




I am using a 1" OD x 0.766" ID x .0625" Thk. gasket.
 
Status
Not open for further replies.

Similar threads

KernOily
  • Locked
  • Question Question
API 661 Vs. Non-API: Summary of Differences?
Replies
0
Views
216
KernOily
KernOily
psupeteng
  • Locked
  • Question Question
Designing a Natural Gas Line Heater to spec API 12k. How do you detail the weld joints?
Replies
1
Views
217
chicopee
chicopee
SJmetallurgist
  • Locked
  • Question Question
Reasons for not using perforated impingement plate - API 660
Replies
6
Views
331
SJmetallurgist
SJmetallurgist
dineshakabari
  • Locked
  • Question Question
FAT & SAT for Air Finned Cooler (API 661)
Replies
0
Views
103
dineshakabari
dineshakabari
roca
  • Locked
  • Question Question
API 661 Clause 7.1.6.1.5
Replies
3
Views
275
roca
roca

Part and Inventory Search

Sponsor

Back
Top