Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 598 vs DIN 3230-3 1

Status
Not open for further replies.
DAT17

DAT17

Chemical
Joined
Jun 3, 2005
Messages
12
Location
CG
Can ayone advise what the major differences between the API 598 and DIN 3230 part 3 for valve testing are? Is the DIN standard more onerous?
 
Sort by date Sort by votes
DIN 3230-3 is no longer valid, it was replaced by EN 12266.
Generally API 598 allows much bigger leakage rates.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Bazinga
  • Question Question
API 6D - Specified Level for Hydrogen (SLH)
Replies
2
Views
4K
Bazinga
Bazinga
Joe2221
  • Locked
  • Question Question
API 602 vs API 600
Replies
1
Views
900
Krausen
Krausen
I
  • Question Question
Classification of Swing Check Valve Opening Type per API 6D Clause 4.4
Replies
5
Views
16K
ilkerdburhan
I
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
Krausen
  • Locked
  • Question Question
API Valve Trim Type & NACE reqs (Gates, Globes, Checks)
Replies
1
Views
2K
Danlap
Danlap

Part and Inventory Search

Sponsor

Back
Top