Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

api 537 or 752

Status
Not open for further replies.
APIEric

APIEric

Petroleum
Joined
Oct 13, 2005
Messages
7
Location
US
I am looking for information about the API recommended practices of 537 and/or 752. I have a question about combustors/incinerators. I have a copy of API 521, however the staff engineer is wondering if this really applies to this type of service, and I am not sure if the API 537, or the 752 would shead more light on the matter. Anyne have any ideas/suggestions?

Thanks
 
Status
Not open for further replies.

Similar threads

liamlucas
  • Question Question
api 617 vibration limits
Replies
1
Views
4K
HTURKAK
HTURKAK
A
  • Question Question
API 650 Nozzle on weld joint
Replies
2
Views
12K
Oscarvs
Oscarvs
M
  • Question Question
convert BS EN1998-1 data to API 650
Replies
1
Views
385
HTURKAK
HTURKAK
nabeel3
  • Question Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting
S
  • Locked
  • Question Question
API 5L mass per unit length
Replies
3
Views
4K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top