Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 1104 - welder position

Status
Not open for further replies.
hmzM

hmzM

Petroleum
Joined
May 16, 2003
Messages
14
Location
SD
Hi, refer to the API 1104 - Clause 6 Qualification of Welders.

1. If a welder passed 5G qualification, what is the tolerance (degree) for the horizontal production welding?

2. What is 6G (tolerance of degree) during the production welding?

I noticed that no further details in the API1104, shall we need to refer to ASME IX with regards to the position?
 
Status
Not open for further replies.

Similar threads

liamlucas
  • Question Question
api 617 vibration limits
Replies
1
Views
4K
HTURKAK
HTURKAK
FATHY99
  • Locked
  • Question Question
API 1104 22 EDITION PQR QUALIFICATION
Replies
3
Views
888
SJones
SJones
A
  • Question Question
API 650 Nozzle on weld joint
Replies
2
Views
12K
Oscarvs
Oscarvs
M
  • Question Question
convert BS EN1998-1 data to API 650
Replies
1
Views
387
HTURKAK
HTURKAK
nabeel3
  • Question Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top