Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 1104 20th welder qual?

Status
Not open for further replies.
PipinFool

PipinFool

Petroleum
Joined
Jul 24, 2006
Messages
9
Location
US
As you may know, the 19th edition of 1104 contained an error in figure 12 under the welder qualification section. An errata was issued in 2001 but it only claimed the error in the greater than 12" diagram. I have ordered the 20th edition, but I need to know RIGHT NOW if the diagram in the 20th edition is the same as the 18th or the 19th edition.

Thanks!
 
Status
Not open for further replies.

Similar threads

liamlucas
  • Question Question
api 617 vibration limits
Replies
1
Views
4K
HTURKAK
HTURKAK
FATHY99
  • Locked
  • Question Question
API 1104 22 EDITION PQR QUALIFICATION
Replies
3
Views
887
SJones
SJones
A
  • Question Question
API 650 Nozzle on weld joint
Replies
2
Views
12K
Oscarvs
Oscarvs
M
  • Question Question
convert BS EN1998-1 data to API 650
Replies
1
Views
386
HTURKAK
HTURKAK
nabeel3
  • Question Question
API 650_Polygon shape for Bottom plate
Replies
3
Views
3K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top