TheDruid
Chemical
- Oct 22, 2007
- 14
Hi folks,
after successfully (with the help of this forum - thanks) designing a new valve, we wanted to check the existing valve [1].
But there is afaik no data.
The valve casing is cast iron with cast labelling:
1. side
DN 65
DN 40
24 82
F4410
2. side
GL V(M/H/N) 05KS
3. top (Bell)
GL 155 23 40
It old and was used by Lurgi. Maybe someone knows.
thank you very much
Alex.
[1] there will be a change in process in the future, and we want to know if we could use it again.
after successfully (with the help of this forum - thanks) designing a new valve, we wanted to check the existing valve [1].
But there is afaik no data.
The valve casing is cast iron with cast labelling:
1. side
DN 65
DN 40
24 82
F4410
2. side
GL V(M/H/N) 05KS
3. top (Bell)
GL 155 23 40
It old and was used by Lurgi. Maybe someone knows.
thank you very much
Alex.
[1] there will be a change in process in the future, and we want to know if we could use it again.
