May 15, 2008 #1 Bingos Aerospace Jun 13, 2007 45 Hi Is there any way to generate 5 axis toolpath for STL part file in NX6 Thanks
May 15, 2008 #2 joycejo Aerospace Sep 22, 2006 627 You can import an STL file into NX5 The option to use a Faceted body for part geometry in MFG is an extra license. John Joyce Tata Technologies iKS 1675 Larimer St. Denver, CO http://www.myigetit.com Upvote 0 Downvote
You can import an STL file into NX5 The option to use a Faceted body for part geometry in MFG is an extra license. John Joyce Tata Technologies iKS 1675 Larimer St. Denver, CO http://www.myigetit.com
