SmithsJohn2
Mechanical
Is there any fire-safety version of triple offset? This is all metal butterfly valve, without any plastic material? Should be inherent fire-safe? Thanks for comments.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Any fire-safe version for triple offset?
- Thread starter SmithsJohn2
- Start date
- Status
Yes,
usually triple-offset metal seated valves are inherently fire-safe (in particular when they have graphite and/or ceramic fiber only in their "soft parts", without any PTFE, rubber or other polymers) and fire-tested (according to API 607 or similar standards).
For more information about this type of valves, take a look at the websites mentionen within Thread408-126483 and Thread408-64692 of this Forum.
Hope this helps, 'NGL
usually triple-offset metal seated valves are inherently fire-safe (in particular when they have graphite and/or ceramic fiber only in their "soft parts", without any PTFE, rubber or other polymers) and fire-tested (according to API 607 or similar standards).
For more information about this type of valves, take a look at the websites mentionen within Thread408-126483 and Thread408-64692 of this Forum.
Hope this helps, 'NGL
- Status
Similar threads
- Question