Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Workbench

Status
Not open for further replies.
diananaid

diananaid

Structural
Joined
Aug 20, 2013
Messages
3
Location
GB
I am using Ansys Workbench - structural for a non-lineaar geometry.
I have a symmetric solid body. I used symmetrical feature by XYPlane; and after I analysed it in Modeling Window (Mechanical).
How I can see the whole geometry? (as after I analyse it I just see one half - symmetric)
Thank you!!
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
How to Allow Steel Balls to Move in a Container (Particle Damper) – ANSYS Workbench Transient Analysis
Replies
0
Views
3K
Sandra_N
S
techiestruc
  • Question Question
Prestressed Concrete Modelling using Ansys
Replies
0
Views
4K
techiestruc
techiestruc
sainaa
  • Locked
  • Question Question
Ansys APDL coordinate system
Replies
1
Views
456
rb1957
rb1957
Mateus_R
  • Locked
  • Question Question
Lifting analysis with Ansys Mechanical
Replies
5
Views
1K
Mateus_R
Mateus_R
Max1989
  • Locked
  • Question Question
connection analysis of beam probe data from ANSYS (moment in particular)
Replies
0
Views
338
Max1989
Max1989

Part and Inventory Search

Sponsor

Back
Top