Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys Workbench, select elements

Status
Not open for further replies.
jiligeo

jiligeo

Geotechnical
Joined
Feb 24, 2005
Messages
145
Location
DE
Hi, I am new user in Ansys workbench, how can I select elements in Ansys workbench? I am looking for a command like select entities in Ansys classic.

Regards
Jalil
 
Sort by date Sort by votes
If you create a named selection, than you can refer to it just like in ANSYS classic. If it's a face, then it is a group of nodes and if its a solid body it will be all the elements. Use this in conjunction with the cmsel command.
 
Upvote 0 Downvote

Thanks a lot for your reply. Acually I want to check the number and shape of elements at a section. Usually I am doing that at Ansys classic with selecting the elements.In Ansys workbench, I have found the “New section” Icon with the “show whole elements” button in simulation .

Regards
Jalil

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
Tegguy
  • Locked
  • Question Question
ANSYS: Beam Elements vs Joint Stiffness?
Replies
11
Views
2K
Tegguy
Tegguy
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top