Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys WorkBench 11: Variable Pressure Load on Turbine Blade

Status
Not open for further replies.
hvk

hvk

Aerospace
Joined
Jan 16, 2006
Messages
8
Location
US
Hello all,

Please show me how to apply variable pressure load on a turbine blade using WorkBench 11? This pressure load is variable from leading edge to trailing edge, and from the root to the tip. It has not been created from Ansys CFX; however, it's generated from aerodynamicist with a cylindrical coordinate system.
I'm a newbie to WorkBench.
Thanks for your help.

Best regards,
hvk
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Distributed load on steel grating
Replies
1
Views
1K
Stick.
Stick.
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
assafwei
  • Locked
  • Question Question
Boundary condition on a burst pressure test
Replies
6
Views
690
tigny
tigny
manj1987
  • Locked
  • Question Question
Laptop specs and study material for Ansys workbench
Replies
0
Views
294
manj1987
manj1987
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw

Part and Inventory Search

Sponsor

Back
Top