Hi all,
I am solving a typical 2D Truss problem with appropriate Boundary Conditions and loads. I have used LINK1 elements and the program seems to solve it ok with no errors.
The nodal displacements are displayed; but as soon as I choose the element soltuion for stresses in the x and Y components it gives me the following message window:
Title:'PRESOL Command'
PRINT S ELEMENT SOLUTION PER ELEMENT
*** WARNING *** CP = 28.531 TIME= 11:39:26
No data is available for the selected model or data location specifications.
Any ideas are much appreciated? Thank you kindly in advance.
I have also attached the small file for anyones curiousity.
I am solving a typical 2D Truss problem with appropriate Boundary Conditions and loads. I have used LINK1 elements and the program seems to solve it ok with no errors.
The nodal displacements are displayed; but as soon as I choose the element soltuion for stresses in the x and Y components it gives me the following message window:
Title:'PRESOL Command'
PRINT S ELEMENT SOLUTION PER ELEMENT
*** WARNING *** CP = 28.531 TIME= 11:39:26
No data is available for the selected model or data location specifications.
Any ideas are much appreciated? Thank you kindly in advance.
I have also attached the small file for anyones curiousity.