Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ansys-Thermal Load for deflection

Status
Not open for further replies.
couplefieldansys

couplefieldansys

Structural
Joined
Feb 9, 2013
Messages
2
Location
DE
I am trying to deflect the beam, by using Temp as input.
Beam 2D, patches in the middle.
In Coupled field analysis. I followed with: Temp on patches
Area1(beam), Area4,5(patches)
/Sol
DA,4,TEMP,1275
DA,5,TEMP,1275
I got deflection along x-direction, but doesn't shown in y-direction. why?? shoud i use some other than DA?
 
Status
Not open for further replies.

Similar threads

somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top