Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSYS Composites Tutorial

Status
Not open for further replies.
soundsail

soundsail

Marine/Ocean
Joined
Sep 27, 2011
Messages
2
Location
GB
Hello, I'm trying to do some composites modeling in ANSYS and am not overly familiar with the process. I was reading (much) older threads on here and there was mention of a good composites/laminate tutorial on the customer portal of the ANSYS site but I can't seem to track down that particular tutorial. Does anyone have any knowledge of its whereabouts or any alternatives?

Thanks very much,
Soundsail
 
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
3K
struclearner
struclearner
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top