Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ANSI Y14.36M VS. ISO 1302

Status
Not open for further replies.

dtwo

Automotive
Oct 17, 2002
137
Hello,

I am wanting to know the major differences between the ANSI Y14.36M and the ISO 1302 standards. These standards define surface finish symbols on drawings.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor