Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Another person looking for help with a GE spec

Status
Not open for further replies.
MetalsGirl23

MetalsGirl23

Materials
Joined
Jun 16, 2015
Messages
2
Location
US
B5TY39A1

I'm beginning to question if there isn't a typo in that, based on what I've been able to find (literally, nothing).

We are sheet steel producers, so I'm leaning toward it is supposed to be a B50 spec of some form?

Any help appreciated, time sensitive.

Thanks all!

-MG
 
Status
Not open for further replies.

Similar threads

Henry Chang
  • Locked
  • Question Question
GE EMPIS SPEC B8A26 Designation G15, B4E4A1, F50LC310A, B8A26 Desigmation G15, B4A37, F65A1A2
Replies
0
Views
556
Henry Chang
Henry Chang
kelcgza
  • Locked
  • Question Question
304 stainless pitting issue - looking for source of chlorides
Replies
11
Views
1K
EdStainless
EdStainless
V
  • Question Question
standard or specifications for low temperature plasma nitriding on 17-4 PH
Replies
2
Views
3K
EdStainless
EdStainless
rollingcloud
  • Locked
  • Question Question
Procurement spec for 304 ss cold worked bar, ~34 - 39 HRC
Replies
11
Views
1K
EdStainless
EdStainless
J
  • Question Question
Charpy Testing for Eyebolts
Replies
2
Views
7K
jamspill
J

Part and Inventory Search

Sponsor

Back
Top