Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

annotation on WaterCAD

Status
Not open for further replies.
ceseng

ceseng

Civil/Environmental
Joined
Dec 6, 2008
Messages
12
Location
US
I have a waterCAD model, the pipe labels showed twice, one on top of others.

any one know how to remove the extra labels?

thanks.
 
Sort by date Sort by votes
You may have the linework (pipes) drawn/inserted twice. If not then you need to uncheck the extra label.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ntandomansa
  • Locked
  • Question Question
Using a Larger Combination Air Valve on a Smaller Pump Mains
Replies
4
Views
907
NW_Wash_Eng
NW_Wash_Eng
ashtree
  • Locked
  • Question Question
PDT test on UF membranes
Replies
2
Views
525
ashtree
ashtree
ATLPipeEngineer
  • Locked
  • Question Question
Resources on Small Distribution Systems with VFD pumps and no distribution tank....
Replies
11
Views
1K
Pinwards
Pinwards
ATLPipeEngineer
  • Locked
  • Question Question
Question on Flowmatic Pump Control Valves
Replies
3
Views
485
JedClampett
JedClampett
Living Stone
  • Locked
  • Question Question
Production on 12" C900 PVC Watermain Install
Replies
11
Views
2K
coloeng
coloeng

Part and Inventory Search

Sponsor

Back
Top