Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Analysis window in pro/e does not stay in front when measuring

Status
Not open for further replies.
greg1962

greg1962

Military
Joined
Aug 28, 2006
Messages
10
Location
US
This is happening on a Sun station with Solaris 10 platform. This was not happening wirh Solaris 8.
This happens with other windows that pop up when
using pro functions.
Please help.

Thanks
 
Sort by date Sort by votes
1) Are you on point or click focus
2) Is it set to bring the whole window in front or just indicate that it is in focus without bringing it in front.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

anaigini
  • Locked
  • Question Question
Problem starting service with systemd scripts
Replies
0
Views
2K
anaigini
anaigini
Zack68
  • Locked
  • Question Question
IoT Project
Replies
0
Views
742
Zack68
Zack68
kellnerp
  • Locked
  • Helpful tip Helpful tip
SolidWorks -- Windows-Delayed Write Failed
Replies
0
Views
754
kellnerp
kellnerp
kellnerp
  • Locked
  • Helpful tip Helpful tip
Using a projector with Ubuntu or *NIX
Replies
5
Views
954
drawoh
drawoh
007bondy
  • Locked
  • Question Question
Solidworks running in wine for ubuntu
Replies
5
Views
1K
Gymmeh
Gymmeh

Part and Inventory Search

Sponsor

Back
Top