Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ammonia Absorption Refrigeration 1

Status
Not open for further replies.

Nielse

Mechanical
Feb 11, 2007
8
In heating a 30% aqua-ammonia solution from ambient to 200 deg C @400psi, would the RATE of ammonai gas production ( Vol/time) be constant, or would it vary as the temperature rises ???.
 
Replies continue below

Recommended for you

The NH3 vapor pressure difference between the liquid phase and the vapor phase is what drives the diffusion. If you are designing an ammonia generator/ dephegmator, wouldn't you say that the operation temperature is constant? Maybe you are thinking about startup conditions.

Since the vapor pressures vary along with temperatures, it would be difficult to say that the diffusion rate would be constant.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor