Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AMINE TREATING PARTICULATE FILTRATION

Status
Not open for further replies.
roker

roker

Chemical
Joined
Jun 23, 2004
Messages
198
Location
IL
Dear all,

Since the particulates load on the filter is not stable what are the guidelines for defining and selecting the proper filtration area for example as a function of amine flow.

regards,
roker
 
Sort by date Sort by votes
Based on your experience or measurements, establish an average loading of particulates and multiply by the amine flow. You will have an average rate of particulate accumulation. That figure will be used by the filter provider to select a filter size for a specific interval between cleaning.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Microcog
  • Locked
  • Question Question
Minimal feed gas temperature for amine unit.
Replies
3
Views
4K
georgeverghese
georgeverghese
Sina
  • Locked
  • Question Question
Flooding in Amine regenerator column
Replies
10
Views
655
0707
0707
Nad87
  • Locked
  • Question Question
Ultra Filtration Module for RO Plant
Replies
5
Views
294
ashtree
ashtree
Motrack
  • Locked
  • Question Question
Amine Reboiler Tubes Running Dry
Replies
3
Views
491
georgeverghese
georgeverghese
EmmanuelTop
  • Locked
  • Question Question
Excessive Sodium content in circulating Amine
Replies
5
Views
290
EmmanuelTop
EmmanuelTop

Part and Inventory Search

Sponsor

Back
Top