Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

alibre pro for $99

Status
Not open for further replies.

berkshire

New member
Jun 8, 2005
4,429
An incredible offer that has not been well publicised is about to come to an end.
Alibre has been offering design pro, normally $999 for only $99 until the end of August. Plus deep discounts on other items. I only found out about this because I went to their site to check a price for an add on.
B.E.
 
Berk, if you didn't have such a good record on eng-tips I'd almost think you were trolling. [2thumbsup]

The $99 offer has been well publicized by web media, print media, and bloggers alike. Also, the $99 deal is for Alibre Design Standard, not Pro. None the less, thanks for the info on these forums. It was something I contemplated posting but didn't want to make it look like promoting or selling, which are against the terms of use.

--Scott
 
Hi Scott,
Well I guess you are a little close to the action, So I can see why you would not want to do this.

And I stand corrected, It is for standard.
I do not go to the Yahoo site very much,I always seem to get a ton of spam after visiting Yahoo groups.

I had been negotiating with a salesman to buy the program at half price ($499.50)I found the $99 offer on the company web site, and bought the program, on the spot, together with the maintenance. When the salesman called me back, I told him what I had done, and asked him why he had not mentioned this, he said he had no knowledge of the special offer.
I figured if Alibre's own Salesmen Really did not know about the offer, maybe others did not either, so I put the word out.
B.E.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor