Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ALE adaptive mesh constraint for cutting simulation in Abaqus/Explicit

Status
Not open for further replies.
ttopoz

ttopoz

Mechanical
Joined
Aug 19, 2009
Messages
7
Location
GB
hello

Anyone have experience with ALE meshing. I have problem in defining ALE adaptivity constraint. in my model I have cutter modelled as rigid and workpiece modelled as rectangular block. I tried to run simulation by choosing the whole workpice as ALE adaptive constraint as lagrangian constraint. Though it seems work, actualy doesn't.

does anyone give suggestion about ALE meshing particulary in applyin constraint.

I would be appreciated with your invaluable help.

Thanks

 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
facing error in Abaqus explicit simulation
Replies
3
Views
1K
FEA way
FEA way
polak7
  • Locked
  • Question Question
Steel rolling process with large deformation - implementing ALE adaptive meshing
Replies
3
Views
2K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
745
FEA way
FEA way
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
B
  • Question Question
Adaptive Meshing with Custom Phase‑Field UEL in Abaqus – Feasible or Challenging?
Replies
1
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top