Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Aircraft removable panels

Status
Not open for further replies.
schofield911

schofield911

Aerospace
Joined
Oct 29, 2005
Messages
1
Location
DE
Does anyone have experience of H7 holes being used for a removable wing panel. With this tolerance on the hole the panel cannot be ICY and would have to be reamed 1st oversize if replacing. The intended screw is NAS1153. This situation is due to the panel structure being held by a composite part so no expansion/contraction on the flange and trying to stop the panel from movement due to temp.
Has anyone seen this situation before?. Seems the wrong way to go to me because the maintenance people will struggle to get the panel off.
 
Status
Not open for further replies.

Similar threads

Helepolis
  • Question Question
Standard for keys and keyways/keyseats design (Aircraft)
Replies
4
Views
9K
WKTaylor
WKTaylor
lLouie
  • Locked
  • Question Question
Aircraft - Fatigue Load Spectrum
2
Replies
33
Views
16K
rb1957
rb1957
C
  • Question Question
Design Phase Product Integration Management- A new GA Aircraft
2 3
Replies
50
Views
36K
kontiki99
kontiki99
E
  • Locked
  • Question Question
statically determinate and indeterminate aircraft structure
Replies
13
Views
6K
enachicago
E
C
  • Question Question
Does anyone uses surfaces aircraft design software from unmanned aerial research ?
Replies
10
Views
4K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top