Air Sparging in waste water treatment

[tito2009]

Hi

I am passing 2.355 cubic meter per hour of water into a reactor and oxygen at 1.52 cubic meter per hour. The pressure of the vessel is 60 psi. Can someone tell me how many holes should the sparger have and what should be the diameter of the holes?

 

[pmrobert]

As it says on each page of this site: No promoting, selling, recruiting or student posting. You are not doing yourself any favors as a potential future professional by trying to shortcut your coursework. This is a simple problem that should be addressed in your textbooks. If I'm wrong, I humbly apologize but my student detector is going off on this one. Good luck!

 

[tito2009]

right

so i graduated with chemical engineering this year and i am new to designing sparger systems.