Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Air Knife flow rate

Status
Not open for further replies.
markatwork

markatwork

Mechanical
Feb 15, 2018
1
Does anyone know of an online calculator for air knife flow rates?
I have an air knife with a .024 x 19.4" slot and need to calculate the flow at 5 psi and 180°F air.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The manufacturers print tables for this.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Question
RPM range for air duster/blower
Replies
10
Views
3K
dgeesaman
dgeesaman
eeprom
  • Locked
  • Question
Calculation of air flow through furnace grate
Replies
16
Views
944
dvd
dvd
R
  • Question
Looking for Help with Air Cylinder Selection for X-Z Slide Configuration 1
Replies
5
Views
3K
Stick.
Stick.
A
  • Locked
  • Question
Methods for Air Filtration and Humidity Reduction in a Glass Box
Replies
6
Views
3K
akithajkr
A
T
  • Question
Designing a Cooling System with a Plate Heat Exchanger – Pump & Flow Control Advice Needed
Replies
2
Views
1K
thomx5
T

Part and Inventory Search

Sponsor

Back
Top Bottom