Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Air Cooled Condenser Vacuum Leaks

Status
Not open for further replies.

JMSki

Mechanical
Mar 12, 2015
1
Typically how long before an in-service ACC develops air in tube leakage?
Those that have experienced leakage do you have the ability to isolate a street - exhaust steam, air-ejector and condensate return so you can run at a reduced load?
 
Replies continue below

Recommended for you

There have been a number of papers EPRI conferences on this subject.
The units that I have seen have little provision for isolation of portions of the condenser.

Some of these units have struggled to meet required air leakage when new.
It is a lot of joints out in the open.

And don't get me started on keeping them clean.


= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor