Stuntee
Mechanical
- Dec 17, 2009
- 3
Hi there, I have a question regarding a project im working on. I have a proffesionaly designed set of planetery gears which were designed to AGMA 11 spec.
The sun is splined on a SAE 24-48P,36T, 30*
The ring is a 63T,
My question is how much and what knind of real world difference will AGMA 9 make VS the specified AGMA 11 on these gears.
My manufacture can not provide higher than AGMA 9 on the internal spline of the sun gear and the internal teeth on the ring gear. But can achive AGMA 11 on the Planets and the teeth of the SUN gear.
Any insight would be greatly apriciated.
The sun is splined on a SAE 24-48P,36T, 30*
The ring is a 63T,
My question is how much and what knind of real world difference will AGMA 9 make VS the specified AGMA 11 on these gears.
My manufacture can not provide higher than AGMA 9 on the internal spline of the sun gear and the internal teeth on the ring gear. But can achive AGMA 11 on the Planets and the teeth of the SUN gear.
Any insight would be greatly apriciated.