davelamps
Mechanical
- Jun 2, 2009
- 10
Hi All
I have been asked to look at changing some fasteners in our gas reception facility on a CCGT, the pressures range from 60bar to 30 bar in a fairly corrosive athmosphere as its close to some cooling towers. Can anyone point me in the direction of a standard to work to for the fasteners, mostly bolts/set screws
I have been asked to look at changing some fasteners in our gas reception facility on a CCGT, the pressures range from 60bar to 30 bar in a fairly corrosive athmosphere as its close to some cooling towers. Can anyone point me in the direction of a standard to work to for the fasteners, mostly bolts/set screws