Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
AFC design
- Thread starter vbpp
- Start date
LittleInch
Petroleum
Air temperature and density - max and min
Fluid to be cooled temp, density, heat capacity, mass flow rate
Forced air or natural ventilation
Area of cooler
Pressure rating of cooler
Fouling rate of cooler fins (sand / dust etc)
Ask a vendor
Search the web
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
Fluid to be cooled temp, density, heat capacity, mass flow rate
Forced air or natural ventilation
Area of cooler
Pressure rating of cooler
Fouling rate of cooler fins (sand / dust etc)
Ask a vendor
Search the web
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
- Status
Similar threads
- Locked
- Question