Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

aeronautical hardware standard parts

Status
Not open for further replies.

robonave

New member
Sep 28, 2002
32
I am detail designing a light plane and I am looking for geometrical and mechanical characteristics of standard parts.
I have found on the net only partial informations and my work archive is not that complete as I need; can anybody point me to sources of informations on this matter?

Thanks

robonave
 
Replies continue below

Recommended for you

Robonave,
Regarding AN-MS-NAS hardware you will find the drawings at ATP, they supply them as a library in the micro-fiche format. As for DIN, EN, LN hardware you need to purchase the individual drawings from Beuth in Germany. They are about 50 Euro each... The ATP library is cheaper per drawing but you need to buy the lot to get what you need. Both suppliers are probably beyond the means of the average individual. Best way would be to make friends with someone working for an aerospace company or airline of some size, as these companies usually have the AN-MS-NAS library in some form.
Good luck,
Dan100
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor