Adding components to assembly in Pro-E

[ADuncan]

Putting together an assembly that has a cover plate requiring many washers and bolts. Was curious if anyone knew a way to add these components in a quicker fashion rather than one component and two constraints at a time?

 

[looslib]

This is the wrong forum.

If the holes are a pattern, then insert one set to the pattern and let the pattern fill them all in.

If the holes are random, then it is one-by-one.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[ADuncan]

Thanks for the response and letting me know I was in the wrong place. Just joined today but found the right forum for those types of posts.