Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ad-Merkblatter Allowead Materials

Status
Not open for further replies.
PeterWay

PeterWay

Mechanical
Joined
Feb 6, 2012
Messages
31
Location
AR
I'm working with some pressure vessels and we had some limitations with the materials.
So basically, my question is if we can use in a calculation based in Ad-Merkblatter a material SA-516gr70 (ASME) with a C22 (1.0402 DIN) materials.
Thanks in advance!
Peter
 
Status
Not open for further replies.

Similar threads

MatMan83
  • Locked
  • Question Question
EN13480 WT calc when elevated temp proof strength of materials is not listed.
Replies
0
Views
847
MatMan83
MatMan83
Barrojose
  • Locked
  • Question Question
Minimal Requeriments for AD Merkblatt
Replies
1
Views
328
fleischfresser
fleischfresser
101Mpa
  • Locked
  • Question Question
AD 2000 CODE CYLINDER FORMULA under inner pressure?
Replies
1
Views
322
saplanti
saplanti
Qual7Eng
  • Locked
  • Question Question
PED - Doubt on PED Materials-Annex
Replies
2
Views
317
Qual7Eng
Qual7Eng
xgiorg
  • Locked
  • Question Question
EN 12952-2 Flanges and fittigs materials
Replies
2
Views
275
denlow60
denlow60

Part and Inventory Search

Sponsor

Back
Top