Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Acrow Prop endplate hole diameters

Status
Not open for further replies.
vidrascu

vidrascu

Structural
Sep 25, 2018
3
Hi all,

As far as I know, the Acrow prop has 8 small holes for nails and other 4 holes for bolts. Does anyone know what the bolt hole diameter is, can't seem to find the info online?

Thanks,

Dan
 
Status
Not open for further replies.

Similar threads

X4vier
  • Question
AISC 358 Endplate connection with RBS. 1
Replies
7
Views
499
X4vier
X4vier
JADEN98
  • Locked
  • Question
Pump skid anchorage without bolt hole 1
Replies
10
Views
1K
JADEN98
JADEN98
chandra sekar
  • Locked
  • Question
endplate shear connection
Replies
7
Views
573
SWComposites
SWComposites
AaronMcD
  • Locked
  • Question
Buckling check needed for circular hole but not for square hole - ASCE spec for holes in webs
Replies
1
Views
215
SWComposites
SWComposites
goldemblem
  • Locked
  • Question
Helical Pile with bar through hole
Replies
3
Views
258
goldemblem
goldemblem

Part and Inventory Search

Sponsor

Back
Top Bottom