I have modelled water as Acoustic element. A cylindrical acoustic wave at 1MHz is created in the medium. When i monitored the acoustic pressure (POR) at another node inside medium I get field at 800kHz. Why this change in frequency is observed? The reduction in amplitude is quite expected due to attenuation, buut not frequency
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Acoustic Simulation
- Thread starter vineethpr
- Start date
Similar threads
- Question
- Question