Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACI 318-99 vs 02

Status
Not open for further replies.

andycivil

Civil/Environmental
Jan 25, 2003
8
Is anyone familiar with the basic diference between these two versions? I am taking the PE in April, and only want to purchase one version. Curently, NCEES wants the 99 version. If there are major differences, do I need to be prepared to buy the 02 version if I pass?
 
Replies continue below

Recommended for you

The load factors (1.7L, 1.4D, etc.) are different from 318-99 to 318-02. They then changed the phi factors correspondingly. The old load factors and phi factors are in an appendix but it might be very confusing to keep this straight during the exam. The other changes would probably not affect any exam problems.
I would borrow a copy of 318-99 for the exam.
 
Thanks for the info. Sounds like you are right, I will try to borro 99 and buy 02 later.

Thanks again
 
Good decision. You'd hate to go into a big exam without all the recommended references. If it made a difference you'd kick yourself. Good luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor