J-std-004 classifies REL0 or ORL0 as having 0% halide as verified quantitatively by IPC-TM-650 test 2.3.35. Does this imply that there should be no detectable halides, meaning that it takes virtually no silver nitrate to get to the red-brown titration end point? I don't see a threshold value to qualify as REL0 or ORL0 unlike REL1 or ORL1 (< 0.5wt%).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
acceptable amount of halide for J-std-004
- Thread starter kevlar49
- Start date
Similar threads
- Question
