Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Standard Remeshing Issue

Status
Not open for further replies.
satyasrinivas

satyasrinivas

Structural
Joined
Jan 18, 2008
Messages
67
Location
CA
Hi,

I have been trying to run an analysis with remeshing option from CAE. The following is the error I am getting

Error in job TwoFauilts061909_remeshing: Unable to delete file(s) ["C:\\Temp\\TwoFauilts061909_remeshing.023", "C:\\Temp\\TwoFauilts061909_remeshing.dat", "C:\\Temp\\TwoFauilts061909_remeshing.stt"]. Please check that you have file ownership and permissions for removal.

I have attached the .cae file to this thread. Any suggestions please ?

Thanks
SS
 
Status
Not open for further replies.

Similar threads

A
  • Locked
Convergence Issue while performing abaqus explicit followed by standard
Replies
2
Views
3K
FEA way
FEA way
G.R
  • Locked
  • Question Question
Abaqus Standard errors
Replies
2
Views
3K
G.R
G.R
B
  • Locked
  • Question Question
Adaptive remeshing and Swept ? Structured meshes?
Replies
2
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
Pam Crash
  • Solved
Fluid filled structure: Implicit transient *Dynamic analysis possible with ABaqus-Standard
Replies
6
Views
7K
jball1
jball1
J
  • Question Question
Error Running eigensolver (ABAQUS/standard rank 0 encountered a SEGMENTATION FAULT)
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top