Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS/standard rank 0 received the SIGABRT signal

Status
Not open for further replies.
Emre SENGUL

Emre SENGUL

Mechanical
Joined
Jan 24, 2019
Messages
30
Location
TR
When I am running my model in Abaqus, I took 'ABAQUS/standard rank 0 received the SIGABRT signal' error in different time step in every running job. What is the reason of it? Could you tell me the reason of it, please?

Note: I took solutions for different load directions with the same model.
 
Sort by date Sort by votes
Check the msg and dat files. They may contain additional errors that are more specific.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Question Question
Error Running eigensolver (ABAQUS/standard rank 0 encountered a SEGMENTATION FAULT)
Replies
1
Views
2K
FEA way
FEA way
G.R
  • Locked
  • Question Question
Abaqus Standard errors
Replies
2
Views
3K
G.R
G.R
mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
401
mj345
mj345
Pam Crash
  • Solved
Fluid filled structure: Implicit transient *Dynamic analysis possible with ABaqus-Standard
Replies
6
Views
7K
jball1
jball1
A
  • Locked
Convergence Issue while performing abaqus explicit followed by standard
Replies
2
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top