Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus, distributed pressure, pressuresurface changes with the time, dload

Status
Not open for further replies.
TToonnii

TToonnii

Materials
Joined
Apr 4, 2017
Messages
1
Location
DE
Hi everyone,
I want to simulate the hydromechanical deep drawing. As we know the pressuresurface, which bears the fluidpressure, increases with the proceed of the process. The magnitude of the pressure could be taken as constant. How can I simulate this? Is it achievable with Dload?
fig1-2k8-6537_wlbuer.gif
 
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Selecting the arcs in ABAQUS/CAE
Replies
2
Views
421
mj345
mj345
otaviobarodrigues
  • Question Question
Pipe pressure load with analytical field and hydrostatic pressure
Replies
2
Views
8K
otaviobarodrigues
otaviobarodrigues
M
  • Locked
  • Question Question
Assistance with VUHARD Subroutine in Abaqus
Replies
3
Views
3K
FEA way
FEA way
Ruben Navas
  • Locked
  • Question Question
Help Needed with Hot Pressure Stamping Simulation in Abaqus
Replies
1
Views
647
FEA way
FEA way
A
  • Locked
  • Question Question
ABAQUS cmd line job seemingly freezes after a long time
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top