Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A106 Gr B and A106 Gr B Nace A333 Gr6

Status
Not open for further replies.
redandysafc

redandysafc

Mechanical
Joined
Dec 18, 2005
Messages
60
Location
GB
If I have a Procedure welded to A333 Gr 6 will this cover me for the welding of A106 Gr b and A106 Grb Nace.
It is just I have never worked with nace before.
Cheers
 
Status
Not open for further replies.

Similar threads

gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation & unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
Andrewstructure
  • Locked
  • Question Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
720
Andrewstructure
Andrewstructure
APIpipeWholesaler
  • Locked
  • Question Question
ASTM A252 Gr 3 with 50 KSI min yield
Replies
3
Views
1K
APIpipeWholesaler
APIpipeWholesaler
C
  • Locked
  • Question Question
ASME B16.11&B16.5
Replies
3
Views
4K
SnTMan
SnTMan
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz

Part and Inventory Search

Sponsor

Back
Top