Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A105/LF2 Cl.1 dual certified for High temperature

Status
Not open for further replies.
Luigi De Micheli

Luigi De Micheli

Petroleum
Jul 31, 2019
3
Is possible use A105/LF2 dual certified cl.1 for service temperature 400°C ?

In The B16.34, A105 and LF2 means 425°C ( but not raccomanded)
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Ask the valve manufacturer. Even if the steel parts are ok, the sealing parts likely will not be suitable for that high temperature unless specifically designed for it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
Charlesan
  • Locked
  • Question
High Temperature Ball Valves
Replies
6
Views
754
Krausen
Krausen
nihili
  • Locked
  • Question
Throttle valve for high pressure steam
Replies
0
Views
393
nihili
nihili
Eng.Husky
  • Locked
  • Question
Pressure Temperature Rating of Titanium Valves 1
Replies
5
Views
753
HitokiriAoshi
HitokiriAoshi
Newbie2211
  • Locked
  • Question
Water Density by Pressure and Temperature over 1 atm 1
Replies
2
Views
394
shvet
shvet

Part and Inventory Search

Sponsor

Back
Top Bottom